Flat Noodle Link™ Installation Instructions

Learn how to install the Factory Inserted Fence™ to the posts and top rail
Before you begin installation, assemble the framework, top rail, loop caps, etc.

Step 1

Factory Inserted Fence installation step 1

Insert the needle and connect the rolls same as regular chain link fence. Stand the fence up to the posts and top rail, loosely attach to the top rail, attach tension bar and stretch wire into place.

Do not cut the noodle until you have stretched the wire.

Step 2

Factory Inserted Fence installation step 2

How to install the three (3) extra slats in place between spliced sections: Cut the 8” Flat Noodle tail off the end of the roll. Insert one slat at a time while feeding the Flat Noodle tail into place until all three slats are inserted. Make sure the Flat Noodle from the tail overlaps the other Flat Noodle where the extra slats were installed.

Step 3

Factory Inserted Fence installation step 3

Hog ring the overlapped Flat Noodles together to prevent them from moving.

Caution: If you trim the Flat Noodle before stretching the wire, you may end up with not enough Noodle.

Skip to content