We recommend checking out these installation tips and steps before getting started. This will help make the installation process go as smoothly as possible and ensure that the Noodle Link fence looks great once it’s finished.
Step #1: Insert the needle and connect the rolls same as a regular chain link fence. Stand the fence up to the posts and top rail, loosely attach to the top rail, attach tension bar and stretch wire into place. Do not cut the noodle until you have stretched the wire.
Step #2: Install the three (3) slats that come with each roll in the space created as a result of hooking the two rolls or sections together with the wire needle provided.
Step #3: Cut the excess noodle halfway between the two selvages where the two rolls or sections come together, so both ends of the noodle touch. Using the hog ring pliers, hog ring both ends of the noodle to the wire very tightly, making sure both ends are still touching to keep the noodle secure from moving in the wire.
Caution: Trimming the Noodle before stretching the wire may cause you to end up with not enough Noodle.
Step #4: Do not overlap the noodle, make sure the noodle ends are touching and then hog ring tightly. The hog rings must be very, very tight to prevent the noodle from moving in the wire.
Noodle Link Fencing for Your Next Project
Installing Noodle Link and privacy chain link fencing is an efficient way to improve the look and security of your customers’ properties. By following these installation tips and steps, you can ensure that Noodle Link is installed correctly and looks wonderful for years to come.
If you have any questions about installing Noodle Link fencing for your customers, don’t hesitate to give us a ring. Happy fencing!